2 Colors 6th Generation Dual-mode Power Supply Car Solar Powered USB Exhaust Fan Auto Ventilation Fan Car Gills Cooler
Bullet Points: 1、Practical for Use: When the temperature inside the car is too high, toxic gases . Solar exhaust fans can help eliminate toxic gases. 2、Very Useful: The fan helps bring the smell of smoke and sweat out of the car and keeps the air inside the car fresh. 3、Easy to Use: When you get in the car, you will no longer feel bored. It helps to lower the temperature. 4、Healthy and Comfortable: Convection is good for the body, which can provide you and your family with a healthy and comfortable environment.
5、Protective to Use: Because high temperatures can affect the performance and service life of electrical and electronic products in automobiles, this product helps protect electrical appliances.
Instructions for Use:
Plug in the charging cable, the blue light starts flashing, and charging starts until the blue light is always on and the machine is fully charged.
When the green indicator light flashes, the solar panel starts to charge the battery. The fan button can only be turned on after the main power is turned on, the machine starts to work, and the light bar button can be turned on or off as required. Note: Before using the machine, it is recommended to fully charge the machine with a charging cable to activate the battery capacity.
Specification: Name: Car Exhaust Fan Speed: about 3500 rpm Input / output voltage: DC5V Solar position: outside the car window Solar panel power: 3W Rechargeable battery capacity: 4000mAh Continuous working time: about 6 hours Size: about 20.5*6*12.5cm/8.07*2.36*4.92in Weight: about 800g
fan car fan window fan car window fan solar solar fan air conditioner car ac car window ac solar car fan window ac fans vent car air conditioner car vent window vent solar car car fans solar window fan car window air car accessories car cooler car window car
How to Install: 1. First, open the door. Standing outside the car, pull the window down halfway and secure the short strip to the far right of the window. 2. After fixing the short strip, loosen the exhaust fan so that the solar panel and the exhaust fan form a certain angle. Overlap the groove of the exhaust fan with the window. Keep the exhaust fan close to the short strip, adjust the proper position and fix it. 3. Take out the strip and measure the length of the window on the left side of the exhaust fan. Cut out strips of the same length and fasten the strips to the windows to avoid gaps in the windows. 4. In the interior of the car, press the exhaust fan of the car on the window so that it matches the gap between the strips on both sides. 5. Slowly close the window on the exhaust fan by hand. 6. Adjust the angle of the solar panel so that it faces the incident angle of the sun. Fully illuminate the solar panel and charge the NiMH battery.